Skip to content

Basic Operation

support-operation-block1-img1

Switch to Onewheel+ using power switch on the side.

Step fully and firmly on both sides of the blue dividing line.

support-operation-block1-img2

Always wear a helmet.

Lean on a friend to get started.

Slowly come up for balance.

support-operation-block1-img3

Onewheel+ will engage when you reach a horizontal orientation.

Lean forward to accelerate.

Lean back to slow down.

Lean side-to-side to turn.

support-operation-block1-img4

Slow down to < 1 mph and with your toe planted, lift your heel from one side of the rider detection area.

You can also jump off with both feet, but never remove only one foot.

REGENERATIVE BRAKING

Decelerating while going downhill recharges the Onewheel+ battery.

WARNING Riding hills exceeding a 15% grade is extremely dangerous and may result in loss of control or damage to your Onewheel+.

support-operation-braking

DIRECTION AND SPEED

Lean forward to move forward, and lean back to slow down or to move backwards. The more you lean the faster you’ll go.

support-operation-direction

UNDERSTANDING THE FOOTPAD

The front footpad is pressure sensitive and divided into two zones - one on each side of the central line. Both zones must be pressed to begin riding. To stop, slow to a standstill and then remove your feet from one/both zones.

TIP: Avoid repositioning your foot while riding.

support-operation-footpad

TURNING

Use subtle heel-toe pressure for turning left or right. You will begin to turn in the direction you lean. The more you learn, the sharper the turn.

support-operation-turning

Live Life - Carve On...

eCarve LLC

5707 Main St.
New Port Richey, FL 34652

eCarve LLC

5707 Main St.
New Port Richey, FL 34652

Scroll To Top